How To Hang Doors Level With Exposed Hinges Encycloall
How To Hang Doors Level With Exposed Hinges Encycloall from encycloall.com

Introduction

If you're looking to update your kitchen or bathroom cabinets, one of the simplest ways to do so is by changing out the cabinet doors. However, if you want to keep the same cabinet boxes and just change the doors, you'll need to know how to hang cabinet doors with exposed hinges. In this guide, we'll take you through the process step-by-step.

What You'll Need

Before you begin, you'll need a few tools and supplies. Make sure you have the following on hand:
  • Screwdriver
  • Level
  • Drill
  • Measuring tape
  • Exterior-rated wood screws (if your cabinets are made of wood)
  • Hinges
  • Cabinet doors

Step 1: Remove the Old Doors

Start by removing the old cabinet doors from the cabinets. Use a screwdriver to unscrew the hinges from the cabinet boxes.

Step 2: Measure for the New Doors

Measure the height and width of the cabinet opening. Subtract 1/8 inch from each measurement to allow for clearance.

Step 3: Install the Hinges

Place the hinges on the cabinet boxes in the desired location. Use a level to ensure they are straight. Mark the screw holes with a pencil. Use a drill to pre-drill the holes for the screws. Attach the hinges to the cabinet boxes using exterior-rated wood screws (if your cabinets are made of wood).

Step 4: Attach the Doors to the Hinges

Hold the cabinet door up to the cabinet box and line up the hinges. Use a pencil to mark the screw holes on the cabinet door. Pre-drill the holes for the screws. Attach the hinges to the cabinet door using screws.

Step 5: Adjust the Doors

Close the cabinet doors and check to see if they are level and aligned. If they are not, adjust the hinges until they are.

Step 6: Test the Doors

Open and close the cabinet doors to ensure they are working properly.

Step 7: Repeat for All Doors

Repeat steps 3-6 for all remaining cabinet doors.

Step 8: Enjoy Your New Cabinets

Congratulations! You have successfully hung your new cabinet doors with exposed hinges. Enjoy your updated cabinets.

Tips

  • Make sure to use the correct size screws for your hinges.
  • Double-check your measurements before cutting your new cabinet doors.
  • Use caution when drilling near the edge of the cabinet doors to avoid splitting the wood.
  • Ask a friend to help hold the doors while you attach the hinges.

Conclusion

Hanging cabinet doors with exposed hinges may seem like a daunting task, but with the right tools and a little patience, it can be a simple DIY project. Follow these steps and you'll have beautiful new cabinets in no time.